Rheem Comfort Control2 - Advanced Installer Menu

Installation
Thermostat Overview
Thermostat Setup
Advanced Installer Menu
Installer’s Guide  15
Equipment User Menus
Advanced Installer Menu
This menu allows the installer to check installer-specific information or set advanced
settings. It is accessible from the Home screen when the and buttons are pressed
at the same time for three seconds.
Select the items using the
or buttons and press the button to enter the item
to view information or change settings. Press Enter button to save any changes and
display the previous menu or press Home to display the Home Screen. If 2 minutes
pass without any buttons pressed, the Home Screen will return and changes will not be
saved.
Items on the Advanced Installer Menu are:
Communicating Devices Aux Lockout*
 Fault Status Dual Fuel Setpoint: 5°*
 USB Upload Heat Cycle Rate: Medium
 Thermostat Summary Cool Cycle Rate: Medium
 Heat Pump Disable* Humidity Display Adjust
*Items marked with * may or may not appear in the list depending on the
configuration of the system.