Rheem IKONIC RTGH-S10i - Alarm History Clearing and Manifold Rotation; Clearing Alarm History

IKONIC Tankless Water Heater Service Manual
34
CLEARING ALARM HISTORY
1. Redo from above step.2, and press the “▼” or “▲”
button until “Clear History?” is displayed, and press
“ENTER” to conrm.
2. Press the “▼” or “▲” button until “Yes” is displayed,
and press the “ENTER” button. To exit this setting,
press “BACK” button until the Home screen is dis-
played.
MANIFOLD ROTATE
This tankless water heater can be set to rotate the “Man-
ager” unit in a manifold system by completing the follow-
ing steps:
1. Press the “SERVICE” button on the instance 01 heat-
er.
2. Press the “▼” or “▲” button until “Manifold rotate?”
is displayed, and press the “ENTER” button.
3. The factory setting is “No”. Press the “▼” or “▲” but-
ton until “Yes” is displayed, and press the “ENTER”
button. To exit this setting, press “BACK” button until
the Home screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear History
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Manifold Rotate
USER INTERFACE AND OPTIONS