Rheem IKONIC RTGH-S11i - Viewing Active Alarms

IKONIC Tankless Water Heater Service Manual
33
1.7.1 VIEWING ACTIVE ALARMS
This water heater can display up to 4 active alarms.
Users may clear these alarms on the user interface by
completing the following steps.
Confirming the current alarms (up to 4 alarms)
1. Press the “ SERVICE ” button
2. Press the “▼” or “▲” button until "Current Alarms ”
is displayed, and press "ENTER" to confirm.
3. Press the “▼” or “▲” button and the LCD displays
current alarm 1 to 4.
CLEARING THE CURRENT
ALARMS
1. Redo from above step.2, and press the “▼” or “▲”
button until "Clear Alarms?" is displayed. Press “
"ENTER" to confirm.
2. Press the “▼” or “▲” button until "Yes" is dis-
played, and press the “ENTER” To exit this setting,
press “BACK” until the initial screen is displayed.
1.7.2 ALARM HISTORY AND
CLEAR HISTORY
This water heater can display up to 6 previously ob-
served alarms. Users may clear these alarms on the
user interface by completing the following steps:
Confirming the previously observed alarms
(up to 6 alarms)
1. Press the “ SERVICE ” button.
2. Press the “▼” or “▲” button until "Current Alarms ”
is displayed. Press "ENTER" to confirm.
3. Press the “▼” or “▲” button, the LCD displays pre-
viously observed alarm 1 to 6.
GENERAL INFORMATION
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes