IKONIC Tankless Water Heater Service Manual
63
ERROR T110
EXPLANATION
WiFi chip communication error
If the WiFi chip is not communicating with the user inter-
face, the water heater displays the “T110” error code on
the user interface.
Diagnostic check items
• User interface.
Check method
If the LCD displays “T110” error code, reset WiFi setting
and set WiFi again.
To reset the WiFi setting, please refer to section “1.7.6
Reset WiFi setting” (pg 36).
If “T110” error code is displays even after setting WiFi
again, please replace the user interface.
ERROR CODE DIAGNOSTICS
To Next Page
Loading...
