Rheem Raypak CROSSWIND-30-I - 9. TECHNICAL PARAMETERS; Inverter Model Technical Specifications

27
9. TECHNICAL PARAMETERS
NOTE: Technical parameters as published in AHRI
directory.
Inverter Models Only
Parameter
Crosswind Inverter Models
30-I 40-I 50-I 65-I
Performance Condition: Air 80°F (27°C), Water 80°F (27°C), Humidity 80%
Heating capacity (BTUH) 27,850 33,500 44,750 61,000
Heating capacity (BTUH) in silent mode 24,000 29,600 35,000 42,000
COP 5.8 5.6 6.1 5.74
Performance Condition: Air 80°F (27°C), Water 80°F (27°C), Humidity 63%
Heating capacity (BTUH) 26,850 31,700 42,500 57,650
Heating capacity (BTUH) in silent mode 23,500 28,600 33,300 40,000
COP 5.55 5.50 5.8 5.3
Performance Condition: Air 50°F (10°C), Water 80°F (27°C), Humidity 63%
Heating capacity (BTUH) 16,590 17,750 21,000 24,500
Heating capacity (BTUH) in silent mode 15,500 17,750 21,000 24,500
COP 4.0 4.0 4.16 4.10
Rated input power (kW) 1.15 1.26 1.28 1.55
Rated input current (A) 5.00 5.5 5.6 6.8
Power supply 208-230VAC/ 1 Ph/60Hz
Refrigerant (R410A) in oz. 28.2 31.7 38.8 45.9
Advised water ux GPM (L/min)
13.2~17.7
(50~67)
17.7~26.4
(67~100)
21.9~30.6
(83~116)
28.5~37.5
(108~142)
Sound pressure 39" (3 m) dBA 33.4~45.2 33.6~45.5 34.9~45.0 38.2~49.3
Heat exchanger Titanium in PVC
Casing ABS casing
Air discharge Horizontal
Water pipe in-out Spec 1-1/2" PVC (50 mm)
Net Dimension
See Table C on page 10.
Net Weight
* The values indicated are valid under ideal conditions: Pool is well covered, ltration system running at least 15 hours a day.
Table J. Technical Parameters - Inverter Models Only