28
10. REPLACEMENT PARTS
NOTE: To supply you with the correct part, it is important
that you supply the heater model number, serial number
and type of gas when applicable.
Any part returned for replacement under standard
company warranties must be properly tagged with a
return parts tag, completely lled in with the heater serial
number, model number, etc., and shipped to the Company
freight prepaid. If determined defective by the Company
and within warranty, a like part or equal substitution will be
returned, freight collect. Credit will not be issued.
On/O Models Only
Parameter
Crosswind On/O Models
40-O 50-O 65-O
Performance Condition: Air 80°F (27°C)/ Water 80°F (27°C)/ Humidity 80%
Heating capacity (BTU) 35,900 46,500 55,100
C.O.P 5.21 5.40 5.71
Performance Condition: Air 80°F (27°C)/ Water 80°F (27°C)/ Humidity 63%
Heating capacity (BTU) 34,100 44,100 51,800
C.O.P 5.03 5.07 5.29
Performance Condition: Air 50°F (10°C)/ Water 80°F (27°C)/ Humidity 63%
Heating capacity (BTU) 20,500 26,000 33,800
C.O.P 3.31 3.17 3.45
Rated input power (kW) at air 80°F (27°C) 1.65 2.3 2.6
Rated input current (A) at air 80°F (27°C) 7.7 10.8 11.8
Power supply 208-230V/1Ph/60Hz
Minimum circuit ampacity (A) 12 16 17.2
Advised water ux GPM (L/min)
17.7~26.4
(67~100)
21.9~30.6
(83~116)
28.5~37.5
(108~142)
Sound pressure 3m dB(A) 41.50 41.70 42.40
Heat exchanger Titanium in PVC
Casing ABS casing
Air discharge Horizontal
Water pipe in-out Spec 1-1/2" PVC (50 mm)
Net Dimension
See Table C on page 10.
Net Weight
Related parameters are subject to adjustment periodically for technical improvement without further notice. For details please refer to
nameplate.
Table K. Technical Parameters - On/O Models Only
MANUFACTURER:
Raypak, Inc.
2151 Eastman Avenue
Oxnard, CA 93030
1-800-260-2758
To Next Page
Loading...
