59
Reset Wi-Fi Credentials
Resetting the Wi-Fi is useful when the heater is trying to
connect to a Wi-Fi signal that is not available or has been
changed. See Figure 91 through Figure 94.
NOTE: After resetting Wi-Fi credentials, the heater
needs to be manually connected again to Wi-Fi to work
with Raymote features. Ensure to reconnect as existing
unit in Raymote app or add it as a new device.
1. Press and hold the CONNECT key for 5-seconds.
OFF
Water Temp 68F
Figure 91. Wi-Fi Reset – Press and Hold CONNECT
2. The display shows “Reset Wi-Fi?” In the top row and
“No” in the second row.
3. To cancel and exit, press MODE.
Reset WiFi?
No
Figure 92. Wi-Fi Reset Menu
4. To proceed with reset, press UP key.
5. Second row now shows “Yes".
Reset WiFi?
Yes
Figure 93. Wi-Fi Reset Conrmation
6. Now press Mode key to reset.
7. “Wi-Fi Initialized” message is displayed.
WiFi Initialized
Figure 94. Wi-Fi Reset Completed
8. Now connect again or re-configure an existing heater.
Reconnect to Wi-Fi
Follow the next steps to reconnect a heater already
registered in Raymote, to a new Wi-Fi network or after a
change of Wi-Fi password.
1. Select the device that needs to be reconfigured.
2. Press the 3-dots button on top-right corner to open
unit settings. See Figure 95.
Off Pool Spa
Figure 95. Open Unit Settings
To Next Page
Loading...
