20
Boiler Screen
The Boiler page displays detailed information of the heater.
This page can be used to review performance in real time
as well as historical data of the heater. The Boiler screen
presents specic unit data, but not application data. See
Figure 39.
NOTE: Some information is not standard on all units,
such as Flow, Vent (temperature), and O monitoring.
Figure 39. Boiler Screen
Adjust Screen
The Adjust screen includes all available unit controls in
the Raymote mobile app. These controls allow users to
remotely change limited settings of the boiler.
A
WARNING: Only authorized users have access to
remotely control the boiler, do not provide credentials
to unauthorized users. Control attempts will modify
settings on the unit and impact operation of the unit.
Some controls are application dependent and may not be
available on all units. When a control or set of controls are
not available, these will be grayed out.
Raymote controls will reect the actual status of the value
on the local unit. When a change is applied to any control
item, the position of the slider will reect the conrmation
value of the setting. See Figure 40.
Figure 40. Adjust Screen
To Next Page
Loading...