28
Figure 56. Bar Graph Analytics 1
Figure 57. Bar Graph Analytics 2
Update Boiler Data on
Existing Devices
Metadata of a device is the most descriptive information
that would help to make sure all Raymote functions and
experience is accessible. The Proper device setup will
help to improve service, identication, and analysis of the
products within the network. It is strongly recommended
to complete all the Device Setup Metadata, however the
most important elds are Serial Number, Model, Site
Contact, Service Contact, and Job Site.
The Device information can be added during or after
provisioning the unit, it can be provided over the web
dashboard or mobile phone.
Providing SITE CONTACT information will ensure that
early notications, proactive maintenance reminders, are
sent to the right person. Typically, the building manager
or site administrator that have access to boiler room is
assigned in the eld.
The SERVICE PROVIDER is the Raypak sales partner
or approved contractor. This person is the sta member
in charge of monitoring and maintaining the optimum
operation of the unit.
The JOB SITE denes the location of the unit; this
assignation allows installers to associate and group devices
into a specic customer site. Once a Job Site location is
created or already exist, this becomes a grouping option
for multiple units that share the same location (refer to
"How to Create a Location" on page 25).
To Next Page
Loading...