34
Service Charts Tutorial
To view service charts using Raymote, follow the next
steps:
1. Select the unit to be analyzed.
2. Select “Service Chart” from the top menu. See Figure
72.
3. On the left panel under "Data streams" type key
words to display and select up to 6 signals to be
include on the graph. See Figure 73.
Figure 72. Service Chart and Signal Selection
Figure 73. Data Streams
4. Move the cursor over the graph area to display
signals values of a given time. See Figure 73.
5. Click-and-hold a certain area on the graph to zoom in
on a specific time frame.
6. Graph will update in the specified time frame. A
“Reset zoom” button will become available on top of
the graph to go back. See Figure 73.
To Next Page
Loading...