42
Boiler Menu
The Boiler View displays various items regarding ignition, temperature monitoring, and modulation rates. As well
as software and hardware information
Table Q: Boiler Menu
Item Application Description
IGNITION All Current State of Ignition
LIMIT TEMP All Current Limit Temperature
AUX TEMP H MODE 3 Current Auxiliary Temperature
EMS Vdc All Current EMS signal in Volts DC
FIRE RATE All PIM™ firing rate
SPEED X1000 BLOWER All Blower speed, Revolutions/Minute
HIGH LIMIT All High Limit Setting *
H L OFFSET All High Limit Offset *
OPERATOR All Operator Limit Potentiometer (PIM™) setting
AUTO DIFF
H MODE 1,2,3
Current auto differential
PUMP PREPt All Duration of pump prepurge
BLOW PREPt All Duration of blower prepurge
BLOW PREPr All Blower % during prepurge
BLOW POSTt All Duration of blower postpurge
BLOW POSTr All Blower % during postpurge
MIN RATE All Minimum modulation rate % during operation *
START RATE All Start modulation rate % during ignition *
MAX RATE All Maximum modulation rate % during operation *
FLAME CUR All Flame current in micro-amps
IGN TYPE All PIM™ board type
MASS All Thermal mass of the boiler
ID CARD All Identifies OEM identity card
PIM™ ID All Identifies OEM PIM™ PCB
SW ID All PIM™ software identification number
* Fixed values based on ID card
To Next Page
Loading...
