- 142 -
MULTI TYPE
2, 3, 4 ROOMS TYPE
4. Press the MODE button again to return to the clock display. The custom code will be changed.
• If no buttons are pressed within 30 seconds after the custom code is displayed, the
system
returns to the original clock display. In this case, start again from step 1.
•
The air conditioner custom code is set to A prior to shipment.
• The remote controller resets to custom code A when the batteries in the remote controller are
replaced. If you use a custom code other than cu
stom code A, reset the custom code after
replacing the batteries. If you do not know the air
conditioner custom
code setting, try each of the
custom cod
es ( Ѝ Ѝ Ѝ ) until you find the code which operates the air conditioner.
To Next Page
Loading...
