Rheem ROMH36AFXZJ - Page 30

- 22 -
MULTI TYPE 2, 3, 4 ROOMS TYPE
z
Sleep timer
The sleep timer function automatically corrects the temperature thermostat setting according to
the time setting to prevent excessive cooling and heating while sleeping.
z
Switching remote controller custom code
Code selector switch eliminates unit being wrongly switched. (Up to 4 codes can be set.)
* I.U.: Indoor unit
z
Temperature unit switchable
Easy to change the temperature unit between °F and °C by button operation.
Cooling operation/Dry operation
When the sleep timer is set, the set temperature
automatically rises 2 °F (1 °C) every hour. The
set temperature can rise up to a maximum of 4 °F
(2 °C).
Heating operation
When the sleep timer is set, the set temperature
automatically drops 2 °F (1 °C) every 30 minutes.
The set temperature can drop to a maximum of 8
°F (4 °C).
60 min
2 °F (1 °C)
4 °F (2 °C)
Timer setting
30 min
60 min
90 min
Timer setting
2°F (1°C)
4°F (2°C)
6°F (3°C)
8°F (4°C)
AB C D
AB
C
D
Mixed-up
I.U. I.U. I.U. I.U.
I.U. I.U. I.U. I.U.
After code change