18
CARING FOR YOUR WATER HEATER
CAUTION:
DO NOT tap or force the filter during removal. This can
deform and/or damage the filter.
Unscrew the water filter from the base of the cold water
inlet line and carefully slide it out of the line.
Clean the water filter under running water. To remove
severe sediment and dirt, use a soft brush.
CAUTION:
DO NOT overtighten the water filter. Overtightening can
deform and/or damage the filter.
Replace the filter in the cold water inlet line and tighten
until it is snug.
Turn on the water supply, reconnect the electrical
supply, and turn on the water heater.
4
7
5
6
Care and Cleaning (cont.)
Care Instructions
To Next Page
Loading...
Need help?
General
