To Next PageTo Next Page
Need help?Do you have a question about the Rhino Winch 17500lb and is the answer not in the manual?
General| Maximum Load Capacity/Rated Line Pull/Line Pull Capacity | 17500 lb |
|---|---|
| Gear Ratio | 265:1 |
| Cable/Rope Length | 85 ft |
| Cable/Rope Diameter | 3/8 in |
| Braking Action | Automatic load-holding brake |
| Motor Type | Series Wound |
| Gear Type | 3-stage planetary |
| Rope Type | Steel cable |
| Voltage | 12V DC |
| Remote Control | Wireless remote included |
Detailed instructions and components for securely installing the winch, emphasizing proper orientation.
Guidance on using wireless remotes, including battery location and keeping them dry.
Steps for operating the clutch for freespool, with important safety warnings for proper engagement.
Steps to connect the control box wires to the winch, specifying wire colors and terminals.
Instructions for connecting the control box to the battery using specific cables and terminals.
Explanation of symbols used in the manual for safety warnings, cautions, and notices for user protection.
Details on FCC compliance for the device, including operational conditions and measures to correct interference.
Safety guidelines to prevent injury from falling objects or crushing, including stand clear and rope handling.
Safety measures for chemical and fire risks, covering jewelry, eye protection, and electrical terminal safety.
Safety advice to avoid entanglement with moving winch parts, covering hook closure and keeping clear.
Critical safety rules for winching operations, including capacity, rope turns, and load securing.
Overall safety guidelines for operation, installation, and handling of the winch and its components.
Safety instructions to prevent injury from moving parts, focusing on hook closure and safe load application.
Safety measures to avoid cuts and burns, including glove usage and awareness of hot surfaces.
Guidelines to prevent damage to the winch and equipment, covering side pulls, clutch engagement, and submersion.
Technical specifications including line pull, speed, amp draw, and a detailed parts breakdown with quantities.
Technical specifications covering line pull, speed, amp draw, and a comprehensive parts list.
Specifications for line pull, speed, amp draw, and a detailed list of winch components with quantities.
Diagram illustrating the wiring connections for the wireless remote system, showing component interconnections.
Checklist for routine maintenance tasks, categorized by frequency: before first use, after each use, and every 90 days.
Identifies common winch problems, their potential causes, and recommended remedies for quick resolution.
Guidelines for the proper disposal of batteries and electronic equipment, adhering to local and EU regulations.
Declaration stating compliance with relevant EU Directives and standards for safety and health requirements.
