RHINO BLX 65 BMR GPS User Manual

ELEKTROBOOTSMOTOREN
MOTEURS ELECTRIQUES
SILNIKI ELEKTRYCZNE
MOTORE ELETTRICO
ELEKTROMOS CSÓNAKMOTOROK
ELEKTRISCHE BUITENBOORDMOTOREN
ZÁVĚSNÉ ELEKTROMOTORY
ELEKTRICKÉ MOTORY
ELECTRIC OUTBOARD MOTOR
Owners Manual
Bedienungsanleitung
Manuel d'utilisation
Manuale d’istruzioni
Instrukcja Obsługi
Handboek
Instrukcja obsługi
manuál
Návod na používanie
Manuel d'utilisation
Manuale d’istruzioni

RHINO BLX 65 BMR GPS Specifications

General

Compression Ratio	8.5:1
Fuel System	Carburetor
Ignition	CDI
Engine Type	Four-stroke, single-cylinder
Cooling System	Air-cooled

Summary

1. GENERAL

1.1 Introduction

Welcomes user, explains manual's purpose and product benefits.

1.2 Warranty terms

Outlines the 2-year warranty, coverage, and exclusions for the electric motor.

2. SYSTEM OVERVIEW AND SETUP (Page 3)

2.1 Charge indicator display

Explains the battery charge status display located on the motor's mounting unit.

2.2 Assembly

Details attaching the motor to the boat's bow area using the standard holder.

2.3 Assembly

Covers positioning the motor and securing the holder to the boat deck.

3. MAINTAINANCE

3.1 Troubleshooting

Provides solutions for common performance, power, and noise issues.

4. DECLARATION OF CONFORMITY

2. SYSTEM OVERVIEW AND SETUP (Page 4)

2.4 Starting the motor

Step-by-step guide for lowering the motor into the water.

2.5 Move the motor to the resting position

Instructions for safely stowing the motor in its resting position.

2.5 Adjusting the depth

Explains how to adjust the motor's immersion depth for optimal performance.

2.6 Changing propellers

Detailed procedure for propeller removal and replacement.

2.7 Electrical connections

Guide for correctly connecting the motor to a 12V battery.

2. SYSTEM OVERVIEW AND SETUP (Page 5)

2.8 Remote control

Information on the functions and usage of the remote control unit.

1. GENERAL (Page 42)

1.1 Introduction

Thanks user for purchase and introduces the remote control guide.

1.2 General start-up instructions

Key steps for securely attaching the motor and checking the battery.

2. SYSTEM OVERVIEW AND SETUP (Page 42)

2.1 Layout of the remote control and LCD display

Identifies main controls and display elements of the remote unit.

2. SYSTEM OVERVIEW AND SETUP (Page 43)

2.2 Switching on the motor and remote control

Step-by-step guide to powering on the motor and pairing it with the remote.

2. SYSTEM OVERVIEW AND SETUP (Page 44)

2.3 Calibration

Instructions for calibrating the remote control's steering function.

3. ADJUSTABLE MODES

3.1 Manual mode

Explains direct motor operation using control buttons and speed adjustment.

3. ADJUSTABLE MODES (Page 45)

3.2 Anchor mode

Describes using GPS to anchor the boat and maintain position.

3.3 Pilot mode

Details activating Pilot mode and selecting Heading or Course settings.

3. ADJUSTABLE MODES (Page 46)

3.4 Travel mode (cruise control)

Explains using cruise control for maintaining speed and adjusting it.

3. ADJUSTABLE MODES (Page 47)

3.5 Track recording

Guide on recording and saving routes (tracks) for later use.

3.6 Navigation mode (approach a spot and follow a track)

Instructions for navigating to saved spots or following recorded tracks.

3. ADJUSTABLE MODES (Page 48)

3.7 Arrival mode

Explains setting the motor's final state upon reaching a destination.