Need help?Do you have a question about the ribbon EdgeMarc 6000 and is the answer not in the manual?
Introduction and initial setup steps for the EdgeMarc 6000 device.
Comprehensive guide for the physical installation of EdgeMarc 6000 hardware.
Steps for initial network configuration and setup of the EdgeMarc 6000.
Information on how to contact Ribbon customer support for assistance.
Accessing and downloading technical documentation for the EdgeMarc 6000.
Details of the five-year limited hardware warranty for the EdgeMarc 6000.
Information regarding the limited software warranty for the EdgeMarc 6000.
Details of the LEDs and ports on the front of the EdgeMarc 6000.
Information on LEDs, ports, and connectors on the rear of the EdgeMarc 6000.
Specifications and features for using microSD cards with the EdgeMarc 6000.
List of items included in the EdgeMarc 6000 shipping box.
Tools and materials necessary for installing the EdgeMarc 6000.
Procedure for powering on the EdgeMarc 6000 after installation.
Regulatory statements regarding Class A compliance for the EdgeMarc 6000.
FCC compliance information and rules for the EdgeMarc 6000.
Regulatory compliance information specific to Industry Canada.
Details regarding the CE Mark and RED Directive compliance for the device.
Steps to connect and access the EdgeMarc for initial network configuration.
Guidance on deploying the EdgeMarc 6000 as a Session Border Controller.
General| Model | EdgeMarc 6000 |
|---|---|
| Category | Network Hardware |
| Product Type | Session Border Controller |
| WAN Interfaces | 2 x 10/100/1000Base-T |
| LAN Interfaces | 4 x 10/100/1000Base-T |
| VoIP Support | Yes |
| VoIP Protocols | SIP, H.323 |
| Firewall | Yes |
| VPN Support | Yes |
| Humidity | 10% to 90% non-condensing |
| Management | Web GUI, SNMP, CLI |
| Power Supply | AC 100-240V |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Compliance | FCC, CE |
To Next Page