Need help?Do you have a question about the Richie Kotzen VICTORY RK50H and is the answer not in the manual?
General| Type | Tube Amplifier Head |
|---|---|
| Power | 50 Watts |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 2 x EL34 |
| Effects Loop | Yes |
| Channels | 2 |
| Footswitch | Included |
| Dimensions | 235 mm |
| Controls | Gain, Master Volume, Treble, Middle, Bass, Presence |
Conditions that mandate professional servicing for the amplifier.
Ensures proper function and safety by using manufacturer-specified replacement parts.
The primary connection point for your guitar.
Adjusts preamp gain for clean to overdrive tones.
Modifies the high-frequency content of the guitar signal.
Varies the amount of built-in digital reverb.
Controls the overall output volume of the amplifier.
Sets the rate and intensity of the tremolo effect.
Indicates power status and manages valve warm-up.
Selects the correct mains voltage for safe operation in different territories.
Connects to AC power and houses the main fuse for protection.
Protects the high-voltage power supply for the output valves.
Connects to speaker cabinets; details on load ratings and combinations.
Switches negative feedback for low end resonance.
Crucial precautions regarding liquids, environment, and qualified personnel.
Steps to set bias for output valves.
How to connect footswitches for amp functions.
Details on using the SEND and RETURN sockets.
Physical size, weight, and rated output power.
Details on product warranty and service.
Procedure to fix loose valve socket connections.
To Next Page
