Rick's CRICKET - Installation, Maintenance, and Adjustments; Tires and Tire Air Pressure; Installing Double Seat; Adjusting Steering Tiller

10
C
heck tire pressure and adjust accordingly by removing custom full wheel cover from each wheel and
removing cap from valve stem, just as with any automobile using pneumatic tires. Always replace valve
stem cap and wheel cover after each tire pressure check operation.
CRICKET Installation, Maintenance and Operational Instructions
Installing Double Seat
a. Position seat squarely on seat frame, with down-
ward-sloping side of seat facing rear of vehicle.
b. Secure seat to frame with six self-tapping
screws provided in delivery kit. (Phillips-head
screwdriver is only tool required.)
----------------------------------------------------------------------------------------------------------------------------------
Adjusting Steering Tiller
Adjust the firmness and/or forward-backward
motion range of the steering tiller by pulling up
the rubber boot at the bottom of the steering tiller
and tightening (or loosening) the nut and bolt that
connects the steering tiller to the front axle.
Tires and Tire Air Pressure
O
perating this vehicle with improper tires, or with
improper or uneven tire pressure, may cause loss of
control, thereby increasing your risk of an accident.
Always use the size and type tires specified in this
manual for this vehicle.
Always maintain proper 8-15 PSI tire pressure
as
described in this manual
, adjusting periodically
for conditions, load, and terrain.
10
C
heck tire pressure and adjust accordingly by removing custom full wheel cover from each wheel and
removing cap from valve stem, just as with any automobile using pneumatic tires. Always replace valve
stem cap and wheel cover after each tire pressure check operation.
CRICKET Installation, Maintenance and Operational Instructions
Installing Double Seat
a. Position seat squarely on seat frame, with down-
ward-sloping side of seat facing rear of vehicle.
b. Secure seat to frame with six self-tapping
screws provided in delivery kit. (Phillips-head
screwdriver is only tool required.)
----------------------------------------------------------------------------------------------------------------------------------
Adjusting Steering Tiller
Adjust the firmness and/or forward-backward
motion range of the steering tiller by pulling up
the rubber boot at the bottom of the steering tiller
and tightening (or loosening) the nut and bolt that
connects the steering tiller to the front axle.
Tires and Tire Air Pressure
O
perating this vehicle with improper tires, or with
improper or uneven tire pressure, may cause loss of
control, thereby increasing your risk of an accident.
Always use the size and type tires specified in this
manual for this vehicle.
Always maintain proper 8-15 PSI tire pressure
as
described in this manual
, adjusting periodically
for conditions, load, and terrain.