Rick's CRICKET - Vehicle Adjustments and Accessories; Adjustment of Legroom and Vehicle Length; Installation of Rear Carrier Rack

To Next Page

To Previous Page

-------------------------------------------------------------------------------------------------

Adjustment of Legroom

and Vehicle Length

a. Use your hand to pull up the spring-loaded

T-lever in the center of the floorboard, just in

front of the engine compartment cover.

b. While still holding T-handle up and unlocked,

firmly push front of vehicle chassis forward 1-2”

(or pull it backward 1-2”) until you “click” into

your desired position.

c. Then push T-handle back down securely to lock vehicle in preferred position.

Installation of Rear Carrier Rack

a. Remove two rear center platform bolts and

install carrier rack support brace and replace

bolts and secure loosely at this time. (Do not

firmly tighten any bolts or nuts until rear carrier

rack is correctly positioned.)

b. Position rear carrier rack on top of support

brace, tighten those two bolts, and secure rack to

vehicle with two bolts in holes at bottom of seat

back.

c. When rear carrier rack is properly aligned,

tighten all six nuts securely to bolts.

NOTE: Whenever there is any doubt whatsoever about a

nything involved with

the operation, maintenance, and safe operation of your CRICKET Electric

Sport Vehicle, always call FREE TECHNICAL SUPPORT at

1-866-798-2227, or e-mail us at info@RicksESV.com.