Scanning from Smart Organizing Monitor
The procedure in this section is an example based on Windows 10. The actual procedure may vary
depending on the operating system you are using.
1. Place originals.
2. On the [Start] menu, click [132 P_132 MF_Series Software Utilities].
3. Click [Smart Organizing Monitor for 132 P_132 MF_Series].
Smart Organizing Monitor starts.
4. Click the [User Tools] tab.
5. Click [Scan].
The dialog box appears.
6. On the [General] tab, specify settings according to the types of originals and scanning,
and the orientation of the original.
5. Scanning Originals
146
To Next Page
Loading...
