Sending a fax using On Hook Dial
The On Hook Dial function allows you to check the destination's status while listening to the tone from the
internal speaker. This function is useful when you want to ensure that the fax will be received.
• The On Hook Dial function cannot be used when [Fax No. Confirmation] under [Administrator
Tools] is enabled.
1. Place the original.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], you cannot send faxes using the exposure
glass.
2. Press the [Home] key.
3. Press the [Fax] icon on the [Home] screen.
4. Press [On Hook].
[On Hook] appears on the screen.
5. Specify the destination using the number keys.
6. If you hear a high pitched tone, press the [Start] key.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], Step 7 does not apply.
7. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
6. Sending and Receiving a Fax
182
To Next Page
Loading...
