Ricoh 132 MF - Page 249

Item Description Value
Admin. Tools
Lock
Specifies an eight-digit
password for accessing the
[Address Book], [Network
Settings], and [Administrator
Tools] menus.
The password must be
specified during the Initial
Setup, which is required after
turning on the machine for
the first time. For details, see
Setup Guide.
Do not forget this password.
The default password is
"00000000".
• On (00000000 to 99999999)
• Off
Default: [On]
IPSec Selects whether to enable or
disable IPsec.
This function appears only
when a password is
specified under [Admin.
Tools Lock].
• Inactive
• Active
Default: [Inactive]
Fax No.
Confirmation
Sets the machine to require a
fax number to be entered
twice when specifying a
destination manually.
When this function is
enabled, you cannot use the
On Hook Dial function.
This function appears only
when a password is
specified under [Admin.
Tools Lock].
• On
• Off
Default: [Off]
Save Scn Data
to USB
Specify whether to enable or
disable Scan to USB.
This function appears only
when a password is
specified under [Admin.
Tools Lock].
• Inactive
• Active
Default: [Active]
Administrator Tools Settings
247