Item Description Value
RX File
Password
Setting
Specify an eight-digit
password for accessing files
of received faxes in the
memory.
You will also be prompted to
enter the password when
you select this setting.
The password must be
specified during the Initial
Setup, which is required after
turning on the machine for
the first time. For details, see
Setup Guide.
Do not forget this password.
The default password is
"00000000".
• On (00000000 to 99999999)
• Off
Default: [On]
7. Configuring the Machine Using the Control Panel
248
To Next Page
Loading...
