SNMPv3 Trap
Item Description
SNMPv3 Trap Select whether to enable the machine to send SNMPv3 traps to the
management host (NMS).
When disabled, [SNMPv3 Management Host 1] and [SNMPv3
Management Host 2] below become unavailable.
SNMPv3 Account 1 Select either [User Account] or [Admin Account].
SNMPv3 Management
Host 1
Enter the IP address or host name of a management host. Can contain up to
64 characters.
SNMPv3 Account 2 Select either [User Account] or [Admin Account].
SNMPv3 Management
Host 2
Enter the IP address or host name of a management host. Can contain up to
64 characters.
SMTP Tab
SMTP
Item Description
Primary SMTP Server Enter the IP address or host name of the SMTP/POP3 server. Can contain
up to 64 characters.
Encryption Select the encryption method from among the items below.
• [None]: Does not perform encryption.
• [SSL/TLS]: Performs encryption from the start to end of SMTP
communications.
• [STARTTLS]: Performs encryption from the middle of communication if
requested by the SMTP server.
Port No. Enter the port number for SMTP (1 to 65535).
• If [None] is selected for [Encryption], "25" automatically appears in
[Port No.].
• If [SSL/TLS] is selected for [Encryption], "465" automatically appears
in [Port No.].
• If [STARTTLS] is selected for [Encryption], "587" automatically
appears in [Port No.].
Configuring the Network Settings
289
To Next Page
Loading...
