Item Description
POP Server: E-mail
Reception Setting
Select whether to leave or delete e-mails in the POP3 server after receiving
them.
[No]: Delete e-mails from the server after receiving them.
[Save E-mail]: Leave e-mails on the server after receiving them.
[Save Only Error Info]: Delete e-mails that are successfully received from
the server only.
POP Interval (minutes) Specifies how many minutes the machine waits between automatic
connections to the POP3 server to acquire new e-mails (2 to 1440
minutes).
Wireless Tab
Wireless LAN Status
Item Description
Wireless LAN Status Displays the status of the connection to the wireless LAN.
MAC Address Displays the MAC address.
Communication Mode Displays the communication mode that the machine is connecting in.
SSID Displays the SSID of the access point that the machine is connected to.
Wireless Signal Status Displays the strength of the wireless signal that is being received.
Wireless Specifies whether or not to use the wireless LAN. This item appears when
the wireless LAN option is installed on the machine.
Wireless LAN Settings
Item Description
SSID Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
Communication Mode [Infrastructure] is selected by default. Therefore, connect the machine to a
wireless router or access point.
8. Configuring the Machine Using Utilities
292
To Next Page
Loading...
