Ricoh 132 MF - When Using Macos

To Next Page

To Previous Page

• In the following setting menu, you can specify which paper tray is selected first when the trays are

automatically selected while you are printing. For details about [Paper Tray Priority], see

page 236 "Paper Settings".

• [Paper Tray Priority] under [Paper Settings]

• If a paper jam occurs, printing stops after the current page has been printed out. After the jammed

paper is removed, printing restarts from the jammed page automatically. For details about how to

remove the jammed paper, see page 336 "Removing Paper Jams".

• After printing on envelopes, make sure to pull up the levers for printing on envelopes back to their

original positions. Leaving the levers lowered can cause print quality problems when printing on

paper other than envelopes. For details about the levers for printing on envelopes, see page 44

"Loading Paper".

When Using macOS

The procedure in this section is an example based on macOS 11.2.3. The actual procedure may vary

depending on the operating system you are using.

1. Open the printer properties dialog box in your document's application.

For details, see page 85 "Displaying the printing preferences dialog box in an application when

using macOS".

2. Set printing options as necessary, and then click [OK].

The printer properties dialog box closes.

3. Click [Print].