Displays the common name of the issuer of the NRS certification. CN = the following 30 bytes.
Asteriskes (****) indicate that no DESS exists.
093
CERT: Valid Start
Displays the start time of the period for which the current NRS certification is enabled.
094
CERT: Valid End
Displays the end time of the period for which the current NRS certification is enabled.
099
DebugRescueGWURL
This SP allows viewing and setting the path for the Rescue G/W URL. However, if SP5816-036
with its factory default setting, the machine connects to the Rescue GW selection specified in the
Rescue Certification. This SP is used to specify a Rescue G/W setting other than that specified
by the default.
200
Manual Polling
NIA
201
Regist: Status
Displays a number that indicates the status of the NRS service device.
0 Neither the NRS device nor Cumin device are set.
1
The Cumin device is being set. Only Box registration is completed. In this status the Basil
unit cannot answer a polling request.
2 The Cumin device is set. In this status the Basil unit cannot answer a polling request.
3 The NRS device is being set. In this status the Cumin device cannot be set.
4 The NRS module has not started.
202
Letter Number
Allows entry of the number of the request needed for the Cumin device.
203
Confirm Execute
Executes the inquiry request to the NRS GW URL.
204
Confirm Result
Displays a number that indicates the result of the inquiry executed with SP5816 203.
0 Succeeded
5. Service Tables
218
To Next Page
Loading...
