[2~3 /1]
2: HDD
3: SD Card
005
Save to HDD
Specifies the decimal key number of the log to be written to the hard disk.
006
Save to SD
Specifies the decimal key number of the log to be written to the SD Card.
009
Copy HDD to SD (4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to each
SD Card.
010
Copy HDD to SD (Any)
Takes the log of the specified key from the log on the hard disk and copies it to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4 MB can be copied to an SD Card. 4 MB segments can be copied one by one to each
SD Card. This SP does not execute if there is no log on the HDD with no key specified.
011
Erase HDD Log Erase Debug Data Log on HDD
Erases all debug logs on the HDD
012
Erase SD Log Erase Debug Data Log on SD Card
Erases all debug logs on the SD Card. If the card contains only debugging files generated
by an event specified by SP5858, the files are erased when SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
013
FreeSpaceonSD Display Amount of Free Space on SD Card
Displays the amount of space available on the SD card.
014
Copy SD to SD (4MB)
Copies the last 4MB of the log (written directly to the card from shared memory) onto an SD
card.
015
Copy SD to SD (Any)
Service Program Mode Tables
231
To Next Page
Loading...
