3. OVERVIEW
This paper feed unit is a two-tray type. Each paper tray [A] is a drawer type
that can hold up to 250 sheets of paper.
The paper feed mechanism uses a corner separator system. The function of
the system is exactly the same as for the main machine except that there is
no paper size detection. The paper size for each paper tray is input at the
operation panel, either by the technician or by the user.
All the electrical components of the paper tray are controlled by the copier
main board through the tray interface board.
[A]
A156/A160/A162 5-4 STM
To Next Page
Loading...
