Ricoh AC205 - Page 111

PRINTING QUALITY PROBLEMS
SM 4-25 B273
Trouble-
shooting
4.5.11 GHOST 3
Description: Image “Ghosting” appears on the output print at
66.3 or 75.5 mm intervals.
Cause Solution
Fusing unit is contaminated Disassemble the fusing unit and remove
matter from the rollers. Clean particles
between the thermistor and the hot roller.
(Use caution. Do not damage the rollers.)
4.5.12 GHOST 4
Description: White or pale “ghosting” appears on the output
prints at 32 mm intervals.
Cause Solution
1. Developer has reached end of life.
2. Incorrect output from the HVPS.
1. Replace the toner cartridge.
2. Check the HVPS supply voltage. Clean
the HV terminals on the cartridge and
cartridge set. Replace the HVPS if the
problem persists.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
B273T924.WMF
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
B273T925.WMF