ERROR MESSAGES
SM 4-35 B273
Trouble-
shooting
Error Description Solution
Priority fax function full The priority fax job queue is full.
Cancel unnecessary priority
fax jobs.
Incompatible
The remote machine does not
have the requested feature, such
as sending a color fax.
This message can also show if
the remote machine does not
have enough memory to
complete the job.
Reconfirm the features of
the remote machine.
Jam1 or No cartridge
Paper is jammed in the paper
exit area, or the toner cartridge is
not installed.
Clear the jam.
Install the toner cartridge.
Line busy
The receiving machine does not
answer, or the line is busy.
Try again later.
Load document
An attempt has been made to set
up a copy/fax job, but no
document is loaded in the ADF.
Load the document in the
ADF and try again.
Scanner locked The scanner module is locked.
Unlock the scanner and
press Stop/Clear.
Stop pressed
The Stop/Copy button was
pressed during a copy/fax job.
Try again.
Toner empty replace toner
The toner cartridge has run out
and the machine stops printing.
Replace the toner cartridge.
Retry redial
The machine is waiting for a
specified timer interval to dial a
previously busy station again.
Press <Enter> to
immediately redial, or press
Stop/Clear to cancel the
redial operation.