ENGINE TEST MODE
B273 5-12 SM
5.4 ENGINE TEST MODE
The Engine Test Mode checks the condition of the print engine. It tests the
condition of each device, and shows the result of the test on the LCD. The Engine
Test Mode is divided into 5 functions (0~4).
5.4.1 HOW TO ENTER ENGINE TEST MODE
Perform this procedure to enter Engine Test Mode:
Press Menu → # → 1 →9 → 3 → 1 in sequence. 'TECH' will
appear on the LCD. The machine will then enter Engine Test
Mode.
Use the operation panel arrow keys to navigate the Engine Test Mode menus.
Press the “Clear/Stop” button to exit Engine Test Mode.
To Next Page
Loading...
