Ricoh AC205 - Page 45

SCANNER ASSEMBLY
SM 3-9 B273
Replacement
Adjustment
8. Release the 3 x clips [H] on the front of the OPE unit [I]. Then remove the OPE
as shown.
NOTE:
Ensure that the harness is threaded through the frame.
9. Remove 4 x  securing the upper part [J] of the scanning unit.
10. Unclip 2 x clip securing the upper part of the scanning unit from the scanner
assembly. Lift the upper part of the scanning unit upward and remove it.
B273R916.WMF
B273R917.WMF
[H]
[I]
[J]