Ricoh AC205 - Page 58

CONTROLLER SHIELD ASSEMBLY
B273 3-22 SM
3.7 CONTROLLER SHIELD ASSEMBLY
Remove the following before removing the control shield assembly:
 Rear cover 3.2.1
 Side covers 3.2.2
1. Remove all connectors and 5 x  securing the controller shield assembly [A] to
the middle cover and the frame. Remove the assembly.
2. Remove 2 x  connecting the NIC card [B] to the
controller board assembly.
3. Remove the NIC card [B].
B273R936.WMF
B273R937.WMF
[A]
[B]
[A]