Ricoh AC205 - Page 65

FUSING UNIT
SM 3-29 B273
Replacement
Adjustment
3.10 FUSING UNIT
Remove the following before removing the fusing unit:
 Rear cover 3.2.1
3.10.1 FUSING UNIT ASSEMBLY
NOTE:
Perform procedure 3.10.1 only if removal of entire fusing unit assembly is
required. Otherwise, use individual component procedures.
1. Unplug the 2 x  from the main PBA and SMPS.
2. Remove the 4 x  securing the fusing assembly [A] and remove the fusing
assembly.
B273R946.WMF
[A]