Ricoh AC205 - Page 73

CRUM BOARD
SM 3-37 B273
Replacement
Adjustment
3.13 CRUM BOARD
Remove the following before removing the CRUM board:
 Rear cover 3.2.1
 Side covers 3.2.2
 Scanner assembly 3.3
 Front cover 3.2.3
 Middle cover 3.6
 LSU 3.12
1. Remove the 4 x  to separate the CRUM board [A] from the mainframe, as
shown above. Ensure that the springs are kept in a safe place.
B273R956.WMF
[A]