Ricoh AC205 - Page 76

TRANSFER ASSEMBLY
B273 3-40 SM
3.16 TRANSFER ASSEMBLY
Remove the following before removing the transfer assembly:
 Rear cover 3.2.1
 Side covers 3.2.2
 Scanner assembly 3.3
 Front cover 3.2.3
 Middle cover 3.6
 LSU 3.12
 Cover Mid-Front 3.15
1. Remove the 3 x  securing the transfer ground [A] and remove the ground.
2. Unplug the Pre-Transfer Lamp (PTL) holder connector [B] and remove the PTL
[C].
3. Remove the PTL lens [D].
B273R959.WMF
B273R960.WMF
[A]
[B]
[C]
[D]