6
S
CANNING
6.3
Scanning From the Control Panel to
an Application
1
Make sure that your machine and computer are turned on
and properly connected to each other.
2
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
3
Press
Scan-to
. The first available menu item, “Application,”
appears on the bottom line.
4
Press
Enter
and press the scroll button ( or ) to select an
application to which you want to send the scanned image.
5
Press
Enter
. The selected application window opens. Adjust
the scan settings and start scan. For details, please refer to
the User’s Guide of the application.
To Next Page
Loading...
