2
G
ETTING
S
TARTED
2.37
6
After the installation is finished, a window appears asking
you to print a test page. If you so desire, select the
corresponding checkbox(es) and click
Finish
.
Otherwise, just click
Finish
.
N
OTE
: After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver.
See “Repairing Software” on
page 2.43.
Custom Installation for Network Printing
You can choose individual components to install and set a
specific IP address.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network,
see the Administrator Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
To Next Page
Loading...
