10
5. Enter the country code. You can confi rm
country codes on the "Country Code List".
Caution
Make sure you enter the proper country code.
The machine might function improperly if you enter
the wrong code.
Country Code: /OK
[02]
Press the Clear/Stop key to erase mistaken num-
bers.
Country Code List
Code Country/Region Code Country/Region
00 France 34 Hungary
01 Germany 35 Czech
02 UK 36 Poland
03 Italy 02 Cyprus
04 Austria 06 Iceland
05 Belgium 02 Malta
06 Denmark 02 Saudi Arabia
07 Finland 18 Morocco
08 Ireland 18 Bahrain
09 Norway 02 Egypt
10 Sweden 02 Iran
11 Sw itzerland 02 Jordan
12 Portugal 18 Kuwait
13
The Netherlands
02 Mauritius
14 Spain 02 Qatar
15 Israel 02 Oman
21 South Africa 02 UAE
32 Turkey 02 Zimbabwe
33 Greece
6. Press the OK key.
“Programmed” will fl ash on the display.
The following display appears.
Year: Press OK
[2002]
7. Make sure the current year setting is cor-
rect. If it is not, enter the year with the
number keys.
Year: Press OK
[2002]
8. Press the OK key.
9. Press or key to select the month.
Month: WV/OK
[March]
10
. Press the OK key.
11
. Enter the date with the number keys.
Day: Press OK
[ 1]
12
. Press the OK key.
13
. Enter the current hour setting (0 to 23)
with the number keys.
Time: Press OK
[12:00]
14
. Enter the current minute setting (00 to 59)
with the number keys.
Time: Press OK
[12:30]
2. Press the OK key. One of the following is
displayed.
A.
Year: Press OK
[2002]
B.
Country Code: WV/OK
Germany
When A is displayed: Go to step 7.
When B is displayed: You must select a
country or region name (country code) for
your machine. Go to step 3.
3. Press the or key to select a country
or region name. If your country or region
name is not displayed, select "Others".
4. Press the OK key.
A. ( If you select a country or region name
in step 3, the following display will appear.)
Year: Press OK
[2002]
B. ( If you select "Others" in step 3, the fol-
lowing display will appear.)
Country Code:
[02]
When A is displayed: Go to step 7.
When B is displayed: Go to step 5.
To Next Page
Loading...
