USING SERVICE PROGRAM MODE
SM 5-1 B044/B045/B046
Service
Tables
5. SERVICE TABLES
5.1 USING SERVICE PROGRAM MODE
Use the service program mode (SP mode) to check electrical data, change
operating modes, and adjust values.
Accessing SP Mode
How to Enter SP Mode
1. Key in the following sequence.
!
→
"
→
#
→
$
→
%
• Hold the % key down for longer than 3 seconds.
2. The LCD displays a menu.
NOTE: Installed applications appear on the menu as follows: “1.Copy”, “2.
Fax”, “3. Printer”. If an application is not installed, the corresponding
item does not appear.
3. Press the number for the application mode you need. (For example, press “1”
to select the copier application mode.) The selected SP mode display appears
on the LCD, as shown.
How to Exit SP Mode
Press ! or the Cancel key one or more times to return to the standby-mode
display.
Accessing Copy Mode from within SP Mode
1. Press the & key.
2. Select the appropriate copy mode and make trial copies.
NOTE: The User Tools LED flashes while you are using copy mode from within
SP mode.
3. To return to SP mode, press the ! key.
[Service P-Mode] No._
1 Copy 2 Fax 3 Printer
B046M001.WMF
SP H5557200 E1 class1
No.1 Feed
B046M002.WMF
To Next Page
Loading...
