USING SERVICE PROGRAM MODE
SM 5-25 B044/B045/B046
Service
Tables
5.1.4 OUTPUT CHECK (SP5-804)
CAUTION: To avoid mechanical or electrical damage, do not leave electrical
components on continuously for a prolonged period of time.
1. Access SP5-804.
2. Select the number that corresponds to the component you wish to check (see
the table below), then press OK or '.
3. Press “1”, then press OK or the ' key to check that component.
4. To interrupt the test, re-enter SP 5-804 and enter a value of “0”.
Input Check Table
Number Description
1 Polygon mirror motor (400 x 400 dpi)
2 Polygon mirror motor (600 x 600 dpi)
3 Main motor
4 Fan motor (slow)
5 Fan motor (fast)
Output Check
Code: 0 Data: 0
B046M011.WMF
To Next Page
Loading...
