USING SERVICE PROGRAM MODE
B044/B045/B046 5-28 SM
5.1.7 FREE RUNS
SP mode offers a variety of free-run operations, as indicated below. Please keep in
mind that prolonged or unnecessary use of free runs can cause machine wear or
other problems. Select the free run that drives only those parts that you specifically
need to check.
Scanner / ADF Plotter
Name SP
Book
Motor
ADF
feed
Exposure
Lamp
Paper
printout
Fusing
Lamp
Remark
Fusing Nip Band
Check
SP1-109
Off Off Off Runs Runs
Factory
use only
Scanner Free
Run
SP4-013
Runs Off Runs Off Off
Free Run SP5-802
Runs Off Runs Runs Runs
Printer Free Run SP5-901
Runs Off Runs Runs Runs
These two
free runs
are
identical.
ADF Free Run SP6-009
Off * Runs Runs Off Off
ADF/Printer Free
Run
SP6-910
Off * Runs Runs Runs Runs
*The motor comes on briefly to move the scanner to the scanning position.
To Next Page
Loading...
