FAX UNIT
B465 1-6 SM
12. Reinstall the FCU cover plate that you removed
at Step 9.
13. Connect the supplied harness to CN1 on the NCU.
14. Attach the NCU-and-bracket [A] to the
cover plate with 4 of the supplied screws.
Connect the NCU cable [B] to CN33 on the
FCU.
15. Reattach the rear cover.
16. Remove the front left cover [C] (! x 2).
17. Set the monitor speaker [D] into the fax
operation panel [E], with the speaker
harness positioned as shown.
B046I136.WMF
B465I510.WMF
B465I511.WMF
[C]
[D]
[E]
[A]
[B]
To Next Page
Loading...
