BIT SWITCHES
B465 5-12 SM
System Switch 0A
No. FUNCTION COMMENTS
0–2 Not used Do not change these settings
3 Continuous polling reception
0: Disabled 1: Enabled
This feature allows a series of stations to be
polled in a continuous cycle.
4 Dialing on the ten-key pad when
the handset is off-hook
0: Disabled 1: Enabled
1: The user can dial on the ten-key pad when
the handset is off-hook.
5
On-hook dial
0: Disabled 1: Enabled
0: On-hook dial is disabled.
6, 7 Not used Do not change these settings
System Switch 0B
No. FUNCTION COMMENTS
0, 1 Automatic reset timer
Bit 1 0 Timer setting
0 0 30 seconds
0 1 1 minutes
1 0 3 minutes
1 1 5 minutes
The machine returns to standby mode when
the timer expires after the last operation.
2–7 Not used Do not change these settings.
System Switch 0C
No. FUNCTION COMMENTS
0–2 Not used Do not change these settings.
3
Paper size selection for ADF mode
0: A4 1: Letter
This switch determines the original size in
ADF mode, and fixes the maximum scanning
width.
4–7 Not used Do not change these settings.
System Switch 0D
No. FUNCTION COMMENTS
0–2 Not used Do not change these settings.
3 Paper size selection for book scan
mode
0: A4 1: Letter
This switch determines the original size in
book scan mode, and fixes the maximum
scanning width.
4–7 Not used Do not change these settings.
System Switch 0E - Not used (do not change any of these settings)
To Next Page
Loading...
