Ricoh aficio 1013F - Page 285

BIT SWITCHES
SM 5-13 B465
Fax Unit
B465
System Switch 0F
No. FUNCTION COMMENTS
0–7 Country code for functional settings
(Hex)
00: France 11: USA
01: Germany 12: Asia
02: UK 13: Not used
03: Italy 14: Hong Kong
04: Austria 15: South Africa
05: Belgium 16: Australia
06: Denmark 17: New Zealand
07: Finland 18: Singapore
08: Ireland 19: Malaysia
09: Norway 1A: China
0A: Sweden 1B: Formosa
0B: Swiss. 1C: Korea
0C: Portugal 20: Turkey
0D: Holland 21: Greece
0E: Spain 22: Hungary
0F: Israel 23: Czech
10: Not used 24: Poland
This country code determines the factory
settings of bit switches and RAM addresses.
However, it has no effect on the NCU
parameter settings and communication
parameter RAM addresses.
Cross-reference
NCU country code: Function 07, parameter
CC.
The bit switch country code will automatically
be changed to the same country code with the
NCU country code when you change the NCU
country code and exit the service mode.
Note: If RAM reset level 1 is done, this bit
switch resets to UK (02) for EU/Asia
models and USA (11) for NA model.
System Switch 10
No. FUNCTION COMMENTS
0–7 Threshold memory level for parallel
memory transmission
Threshold mount = N x 64 Kbytes
N can be between 00 - FF(H)
Default setting: 04(H) = 256 Kbytes
System Switch 11
No. FUNCTION COMMENTS
0 TTI printing position
0: Superimposed on the page data
1: Printed before the data leading
edge
Change this bit to 1 if the TTI overprints
information that the customer considers
important.
1–3 Not used Do not change these settings.
4 Received-time printing position
0: Superimposed on the page data
1: Printed after the data trailing
edge
Change this bit to 1 if the reception time
overprints information that the customer
considers important.
5 Preferred type of terminal
identification to appear on reports
0: Label programmed in the
machine
1: Dialed number
Change this bit to 1 If the customer wants
reports to always show actually dialed
numbers rather than programmed labels. (If
the setting is 0, the report will show
programmed label if one is registered, or
dialed number otherwise).