CONTROLLER FUNCTIONS
SM 4-3 B441
Printer Unit
B441
Tray Lock
If Tray Lock is enabled for a tray, the controller does not use the “locked” tray in the
tray search process. If a tray has, for example, colored A4 size paper for fax prints,
enable tray lock for that tray so that the controller does not select the tray for
printing.
If the user selects a “locked” tray with the printer driver, the controller uses the tray
for printing only when the specified paper size matches the actual paper size in the
tray.
The Tray Lock setting can be specified with a user tool.
(User Tools/Printer features/Job Control/Paper Input/Tray Locking)
NOTE: The by-pass tray cannot be locked.
By-pass Tray
To print from the by-pass tray, select the by-pass tray with the driver. The paper
sizes that can only be fed from the by-pass tray (such as custom sizes), can be fed
from the by-pass tray using “Auto Tray Select”. But other paper sizes (LT, A4, etc),
which can also be fed from the other paper trays, cannot be fed from the by-pass
tray using “Auto Tray Select”.
To Next Page
Loading...
