Ricoh aficio 1013F - 3.8 PAPER FEED SECTION

PAPER FEED SECTION
B044/B045/B046 3-20 SM
3.8 PAPER FEED SECTION
3.8.1 PAPER FEED ROLLER AND FRICTION PAD
1. Take out the paper tray.
2. Clip ring [A]
3. Pull the shaft back, and lift it out.
4. Remove either or both of the following:
• Paper feed roller [B]
• Friction pad [C]
3.8.2 PAPER END SENSOR
1. Take out the paper tray.
2. Open the right door.
3. PCU (☛ 3.5)
4. Paper end sensor [A] (" × 1)
NOTE: When installing the new sensor,
reach your left hand in through the
front and your right hand in
through the right side, and view
from the right side.
B046R702.WMF
B046R929.WMF
[A]
[B]
[C]
[A]