User Tools (System Settings)
18
2
9.Pap.Tray Priority (for
Copy mode only)
You can select the paper tray which will be selected as a default in
the following conditions:
• When the operation switch is turned on.
• When the {Clear Modes} key is pressed.
• When Auto Paper Select mode is not selected.
This illustration shows Type 1 with the optional paper tray unit (2-
tray type).
1: Tray 1
2: Tray 2 (optional paper tray unit)
3: Tray 3 (optional paper tray unit)
This illustration shows Type 2 with the optional paper tray unit (2-
tray type).
1: Tray 1
2: Tray 2
3: Tray 3 (optional paper tray unit)
4: Tray 4 (optional paper tray unit)
Note
❒ Default: Tray 1
Menu Description
To Next Page
Loading...
